creditsbion.blogg.se - Anemometer for android

#Anemometer for android install
#Anemometer for android code

At this time, it can be awakened by the button on the button anemometer.

When the automatic setting is closed, the anemometer will automatically sleep.

when the shutdown time is set to 0, it will not automatically turn off.

Click the start button on the mobile phone interface, and the anemometer and mobile phone can be transmitted in two

when the green light is on, the match is successful.

after installation, the anemometer should be turned on before use and then turn on The Bluetooth transmission function of the mobile phone.

#Anemometer for android install

install mobile phone application prompts according to mobile phone.

#Anemometer for android code

scan the top of the two-dimensional code picture.Temperature -10℃~45 ℃(14℉~113℉) Relative humidity ≤90%RH Store temperature -40℃~60 ℃(-40 ℉~140 ℉) Current consumption About 3mA Weight 153g(including battery) Specifications: Wind Speed Range Unit Range Resolution Accuracy M/s 0.3~30 0.1 ±5% Ft/min 59~5905 19 Knots 1~55 0.2 Km/h 2~90 0.3 Mph 1~65 0.2 Temperature range Unit Range Resolution Accuracy ℃ -10℃~45℃ 0.2 ☒℃ ℉ 14 ℉~113℉ 0.36 ☓.6℉ Battery AAA 1.5V ×2 Thermometer NTC thermometer Operating When the temperature is below 0 ℃, the wind chill symbol will show on the LCD. Measurement: when the wind vane (impeller) turns, LCD instant display wind speed and temperature.Average: Press ” ⑥ “, and the average reading in 15 seconds will be displayed.℃/ ℉ switch option: Press“ ⑤ ”to select a different temperature unit.Backlight： Press“④“， and the backlight will turn on, press again, it will turn off, active for 15 seconds.Max/min: Press “③ ”it will display max or min.M/s meter per second km/h kilometer per hour Ft/min feet per minute knots nautical mile per hour mph mile per hour Setting different wind speed unit： Press “② ”each time, it will be circulated among “ m/s ”, “ Km/h ”, “Ft/min ”, “Knots ”, and “mph” Digit symbol:.LCD will display wind speed, temperature, and battery icons. Recover the battery cover, screw it down press “ ① ”in 1 second to turn on the unit.Put the battery into the battery compartment, All theĪ symbol will blink for 1 second on the display.Measure the wind speed in Current/Average/Max/Min.